A waterproof Christmas lighting consists of an LED lamp, an input joint, an output joint and a junction seat. The LED lamp is connected with an output joint. The shape of the junction seat is circular. The junction seat is provided with an input end and an output end which are uniformly circumferentially distributed around the outer ring surface. The input joint is connected with the input end, the output joint is connected with the output end, Christmas Snowing Lamp and the input end is connected with the output end. A circular groove is arranged on the other end face of the socket opposite the input joint and the output joint. The bottom of each circular groove is provided with a water absorbent sponge, and the bottom of each circular groove is provided with a pin. The input end is provided with a circular groove corresponding to the input joint and a slot corresponding to the slot.
The output end is provided with an annular groove corresponding to the output joint and a slot corresponding to the socket. The outer wall of the output joint and the input joint is provided with an annular convex platform. The end face of the annular convex platform relative to the junction base is in the same plane as the bottom face of the groove. The other end of the waterproof sleeve relative to the outlet joint or the outer wall of the input joint is connected. The end face of each ring-shaped convex platform relative to the connection base is provided with an annular sealing ring, and the input joint is sleeved with a waterproof sleeve, Christmas Snowing Lamp which is connected with the input end 1 through a thread, and the output joint is sleeved with the waterproof sleeve, and the waterproof sleeve is connected with the output end through a thread.
Insert the input connector into the annular groove of input terminal 1, then the input connector will be inserted into the slot, then the LED lamp will glow, and the annular seal ring will be located at their connection, Christmas Snowing Lamp playing a good waterproof effect, and then rotate the waterproof sleeve set on the input connector, so that the waterproof sleeve and the input end are connected by threads. When the waterproof sleeve is tightened, the input connection will be made. The connection between the head and the input end is blocked by the waterproof sleeve, and the waterproof sleeve is not easy to separate from the input end. Similarly, Christmas Snowing Lamp the waterproof sleeve on the output joint is connected with the output thread, and the connection between the output joint and the output end is also blocked by the waterproof sleeve. This can play a good waterproof effect, and at the same time, Christmas Snowing Lamp it can strengthen the connection between the joint and the junction seat, when water accidentally enters the input. When joints or output joints are in place, water can be sucked away by absorbing sponge to further enhance waterproofing performance. When disassembling, it is only necessary to unscrew the waterproofing sleeve first, Christmas Snowing Lamp then pull out the output or input joints. The waterproofing sleeve will be stuck by an annular convex platform, while the other end of the input or output joints is connected with wires, so the waterproofing sleeve cannot be dropped, so there is no need to worry about losing the waterproofing sleeve. The connection is reliable and the operation is simple.